Momotaro ‘Storm Rider’ Denim Jacket

March 21, 2019

Momotaro ‘Storm Rider’ Denim Jacket

Inspired by a classic, taken to the next level by MOMO.

As a famous vintage style seen from Lee, this jacket features super nice inner linings and a contrasting corduroy collar.

The outer shell is made up from a 15.7oz, classic Momotaro denim using Zimbabwe cotton. With time, this one will age to a high contrast look with beautiful honey comb and lightning strike ageing. 

Momotaro retain their high standards for denim construction, you can see the silver coated buttons and detailed construction finished with vintage machines.

For added functionality, the blanket lining in the body section will keep you warm and the smooth poly fabric used in the sleeves makes it much easier to put the jacket on and off.

Wether you’re a quality denim collector or a fan of vintage style, this is a really special choice!

Click here to buy

How We Measure

Pants and Shorts


With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.


One inch down from the crotch measure flat across to the other side.


Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.



Lay flat then measure from the shoulder's edge to the other shoulder's edge.


Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.