Momotaro ‘Revenge On Momotaro’ GTB Tee

September 25, 2017

Momotaro ‘Revenge On Momotaro’ GTB Tee

The ‘Going to battle’ stripes are one of Momo’s most iconic brand symbols! Here we have a special version for you to try with some new, dope R.O.M graphics!

The classic GTB 5.7oz knit fabric is slowly made using vintage machinery with from some of the softest, long fibre Zimbabwe cotton! The graphic prints and GTB stripes are skilfully discharge printed onto the fabric before the entire shirt is sewn together for extra precision! Inspired from the shuttle used in vintage weaving machines, the skeleton design with lettering on the front and back side is super detailed! With wear you can expect to see the prints age to a softer soulful look.

If you are a big fan of Momotaro and love quality design this is one to have in your collection!

Click here to buy

How We Measure

Pants and Shorts


With the major buttoned up (i.e. the top button) open the jeans and lay them flat, like shown. Measure from the front where the major button closes to the back belt loop. Double this measurement to find the waist measurement.

The way we measure the waist is different from the 'Side to Side' technique. If you are used to the 'side to side' technique you can roughly roughly downsize by 1 inch.

For example, 'side to side' measurement for The Flat Head 3002 waist is 28inch and using our method measures at 29.25inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.


One inch down from the crotch, measure flat across to the other side.


Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.





Lay flat then measure from the shoulder's edge to the other shoulder's edge.


Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.