Momotaro 6.5oz ‘GTB’ Denim Pocket Tees

February 28, 2018

Momotaro 6.5oz ‘GTB’ Denim Pocket Tees

The iconic ‘Going to Battle’ stripes are a mark of courage and dedication to quality! 
Created from vintage machines this tubular fabric is soft to the touch and heavier than the previous version!   
Usually only seen on the back pocket of denim, the GTB pocket is made from grand indigo dyed denim and has been carefully printed with heavyweight ink.  
With time the fabric will age to a soft feeling with nice contrast against the iconic GTB stripes!

Click here to buy

Click here to buy

How We Measure

Pants and Shorts


With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.


One inch down from the crotch measure flat across to the other side.


Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.



Lay flat then measure from the shoulder's edge to the other shoulder's edge.


Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.