The Flat Head D306 Denims (High Tapered fit)

January 16, 2017

The Flat Head D306 Denims (High Tapered fit)

For 2017, The Flat Head provides us a new option of their standard "Pioneer" denims which is constructed with their signature 14.5oz denim in High Tapered fit which is perfect for the customers who are looking for a pair of higher rise, bigger thigh and even slightly more tapered in leg openning compares with 3002!

The front & back pockets are double stitched like their 8002 denims which are more durable than usual Japanese denims for your daily wears, this is an ideal pair of modernised tapered fit we highly recommend !

Click here to buy

How We Measure

Pants and Shorts


With the major buttoned up (i.e. the top button) open the jeans and lay them flat, like shown. Measure from the front where the major button closes to the back belt loop. Double this measurement to find the waist measurement.

The way we measure the waist is different from the 'Side to Side' technique. If you are used to the 'side to side' technique you can roughly roughly downsize by 1 inch.

For example, 'side to side' measurement for The Flat Head 3002 waist is 28inch and using our method measures at 29.25inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.


One inch down from the crotch, measure flat across to the other side.


Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.





Lay flat then measure from the shoulder's edge to the other shoulder's edge.


Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.