Classic SDA workmanship with a zesty twist!
Constructed with a heavy belt buckle and screw-down rivet fastening, this is a serious piece built to last more than a lifetime. From the tapered tip, bevelled edges and teardrop eyelets, SDA have put their attention to the details to create a true Made in Japan standard belt.
To make for the most solid, hard-wearing leather strap, SDA has chosen to use Benz leather. It will maintain its shape very well with long-term usage, unlike other belts that will warp and become less aesthetically pleasing. The famous 'Kakishibu' dye is made from Persimmon fruit and creates a rich, dark brown tone with an orange hue. With time you'll see the inner core appear with a brighter colour, just like biting into a ripe persimmon!
If you're keen to get a serious standard belt for long-term usage, go for this!
Pick up and get strapped here
With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.
The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.
For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.
With the jeans lying flat measure from the crotch bar tack to the top of the waistband.
Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.
One inch down from the crotch measure flat across to the other side.
Flatten the leg and measure along the inseam from the crotch to the leg hem.
Measure straight across the hem from side to side.
Lay flat then measure from the shoulder's edge to the other shoulder's edge.
Lay shirt flat and measure from pit to pit.
With the sleeve flat measure from the shoulder to the cuff.
Measure from the shoulder down to the pitt.
With the shirt facing down, Measure from below the collar to the bottom hem.