September 05, 2019


'Grab & Go'!

Inspired by the Japanese folk story of the thief who steals from the rich and gives to the poor, this is a dope one for fans of cult tees!

Skilfully printed with multi colours and PERFECT linework, these will age super nicely as the print fades and cracks.

Using a specially produced cotton fibre called ‘Ripen’, these tees have a mild sluby look with a smooth feel. These extra long fibres are super strong and have an oil rich, soft texture thanks to being partly grown outdoors and indoors for the ultimate yield!

With a 2cm longer vertical length and curved pattern, this will fit you fellas better! Specially designed by us for our overseas market!

Click here to buy!

How We Measure

Pants and Shorts


With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.


One inch down from the crotch measure flat across to the other side.


Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.



Lay flat then measure from the shoulder's edge to the other shoulder's edge.


Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.