If you’re serious about quality comfort, these are some dope modern-vintage styled climbing pants perfect for you!
Created on vintage machines the lightweight fabric is made up of 35% cotton and 65% polyester. The surface is quite unique, the twisted yarn gives off a vintage vibe! With wear, you can expect to see the vintage textured fabric become even stronger as they fade to a lighter shade!
In terms of fit, these are a slim tapered fit with a mid to high rise. The perfect balance of comfort and second skin fitting. During wear, the specially designed, three dimensional crotch allows the pants to fit your body shape better and breath during warmer weather. With velcro fasted back pockets and inbuilt waist belt adjuster, these are some real comfortable yet functional pants for your collection!
Click here to buy
With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.
The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.
For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.
With the jeans lying flat measure from the crotch bar tack to the top of the waistband.
Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.
One inch down from the crotch measure flat across to the other side.
Flatten the leg and measure along the inseam from the crotch to the leg hem.
Measure straight across the hem from side to side.
Lay flat then measure from the shoulder's edge to the other shoulder's edge.
Lay shirt flat and measure from pit to pit.
With the sleeve flat measure from the shoulder to the cuff.
Measure from the shoulder down to the pitt.
With the shirt facing down, Measure from below the collar to the bottom hem.