Momotaro "Copper Lable" Type 2 Denim Jacket Restocked

February 19, 2016


We have just fully restocked Momotaro Copper Label Type 2 Denim Jacket for Australian Fall & Winter! Compares to "GTB" Type 2 Denim Jacket, the Copper Label version is made from 14.7oz peach color selvage ID Japanese denim which will age to a vintage look with wears. The left chest pocket has "Peach" Stitching and pocket flaps go with natural indigo dyed twills linings . 
We guess some of you may just like a simpler design so this might be your very good choice! 
Click here to buy.

How We Measure

Pants and Shorts


With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.


One inch down from the crotch measure flat across to the other side.


Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.



Lay flat then measure from the shoulder's edge to the other shoulder's edge.


Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.