The Flat Head Denims Are Restocked

August 29, 2016

The Flat Head Denims Are Restocked

 

We have just restocked The Flat Head 3002, 5002, 1002 & 8002 which are Standard Items in stores! 

 

The Flat Head 3002 are their most classic 14.5oz denims which are Righthand Denims will appear strong vertical textured fades and a big contrast look with wears & washes. (The ageing photo as below)

 

The Flat Head 5002 has a smoother texture compares with 3002 and will appear even stronger vertical fades and age to a vintage look with wears & washes

 

The Flat Head 1002 is a 16oz version of 3002 which has slightly heavier weight and indigo rope dyed twice more compared with 3002. They will age to a slightly bigger contrast look to 3002 version 

The Flat Head 8002 is a 18oz of 3002, they do feel much heavier than 3002 when you put them on. The major difference is about construction wise compares with 1002. The front and back pockets are all double stitched which have more strength and hardly worn out throughout time

 





How We Measure

Pants and Shorts

Waist:

With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.

Thigh:

One inch down from the crotch measure flat across to the other side.

Inseam:

Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.

Tops

Shoulder:

Lay flat then measure from the shoulder's edge to the other shoulder's edge.

Chest:

Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.