Here we have one of the hottest classics from TFH, for years these have been some of the most sought after tees!
The iconic ‘Flying Wheel’ logo printed onto the front and back of the tee is a hallmark of TFH’s dedication to quality and pays homage to vintage Harley Davidson motorcycle culture.
The tee itself has been made with TFH’s one of a kind loopwheel fabric! This loopwheel fabric is slowly woven on vintage machines and takes a considerable amount of time and skill to make. Construction wise, the triple stitched crew neck, double stitched sleeves and newly introduced flat side seams ensure that the tee will always maintain the perfect fit throughout long time usage!
If you are a ‘Diehard’ fan of The Flat Head or just enjoy wearing quality gear, this is the perfect tee for you, so be sure to grab one before its too late!
Click here to buy
Click here to buy
With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.
The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.
For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.
With the jeans lying flat measure from the crotch bar tack to the top of the waistband.
Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.
One inch down from the crotch measure flat across to the other side.
Flatten the leg and measure along the inseam from the crotch to the leg hem.
Measure straight across the hem from side to side.
Lay flat then measure from the shoulder's edge to the other shoulder's edge.
Lay shirt flat and measure from pit to pit.
With the sleeve flat measure from the shoulder to the cuff.
Measure from the shoulder down to the pitt.
With the shirt facing down, Measure from below the collar to the bottom hem.