Created using vegetable tanned bend cowhide, one of the strongest kinds of cowhide leather, you can wear and enjoy this belt for years!
With time, the tone of the cowhide will appear more sheens. The specially shaped ‘fish eye’ belt holes help to maintain shape over longtime usage.
As for the closure, SDA have used nickel plated brass buckle and pin with a twin screw down fastening. With time the buckle will become more shiny and show off some rough character.
Thanks to the durable design and construction, this is a great belt for daily usage that will last years and only get better with time!
Click here to buy!
With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.
The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.
For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.
With the jeans lying flat measure from the crotch bar tack to the top of the waistband.
Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.
One inch down from the crotch measure flat across to the other side.
Flatten the leg and measure along the inseam from the crotch to the leg hem.
Measure straight across the hem from side to side.
Lay flat then measure from the shoulder's edge to the other shoulder's edge.
Lay shirt flat and measure from pit to pit.
With the sleeve flat measure from the shoulder to the cuff.
Measure from the shoulder down to the pitt.
With the shirt facing down, Measure from below the collar to the bottom hem.