Studio D'Artisan 11oz 'Suvin Gold’ Denim Workshirt

November 06, 2017

Studio D'Artisan 11oz 'Suvin Gold’ Denim Workshirt

When you talk about quality cotton, full grain ‘Suvin Gold’ fibre is one of the highest standards in the world!

If you are looking for a true, high standard denim shirt…this is one of the best options!

As one of the most expensive cotton fibres available, ‘Suvin Gold’ has a totally unique natural oil on the surface! Specially woven by SDA, on vintage machines, the vintage indigo dyed cotton will age to a soulful, soft contrast look! Matching nicely with this soulful look, the specially oxidised iron buttons will also become more beautiful with time! The subtle matte appearance will gradually turn into a rich sheen! 

Construction wise, SDA have used a combination of vintage single needle and chain stitching techniques for extra strength! 

If you’re a denim playa, this is one for you to try!

Click here to buy

How We Measure

Pants and Shorts


With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.


One inch down from the crotch measure flat across to the other side.


Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.



Lay flat then measure from the shoulder's edge to the other shoulder's edge.


Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.