STEVENSON OVERALL CO. "AGGRESSOR" SERGE JACKET (OLIVE)

April 17, 2020

STEVENSON OVERALL CO.

One for the DAILY-BATTLES!

SOC have spliced up this functional design for comfort throughout the day and space for the gears you need! Inspired by a mixture of field, paratrooper and also British vintage jackets, this one has unique look of it’s own!

Made using vintage machines, this heavy serge fabric has a soft feel that holds it shape with time. the over-dyed fabric will gradually age to a soft vintage look.

The twin chest pockets are angular to allow for easier access and like all of the other pockets on this one, these are made in a three-dimensional format to extra space!

To keep cosy, use the hidden waist pockets by entering from the side and adjust the cuffs for a tighter fit. Of course, you aways have the choose to keep things ZIPPED UP with the storm flap!

Click here to purchase!





How We Measure

Pants and Shorts

Waist:

With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.

Thigh:

One inch down from the crotch measure flat across to the other side.

Inseam:

Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.

Tops

Shoulder:

Lay flat then measure from the shoulder's edge to the other shoulder's edge.

Chest:

Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.