Stevenson Overall 320 Solid Black "Jackson" Denims (Slim Tapered fit)

February 01, 2017

Stevenson Overall 320 Solid Black

We have a pair of new black "Jackson" 320 denims in Slim Tapered fit from Stevenson Overall for you!

The denims are constructed with 13.5oz Japanese selvaged denim made from a special grown medium-long fibre cotton which is a great fabric both in texture and comfort. the fabric also has an uneven texture, very sturdy, super rich in colour, which will have a great contrast fade as well!

Compares with "Dixon", "Jackson" has a pair of vintage Lee back pockets design look which is quite an interesting detail!

If you are looking for some "Future Classic" denims, this is a pair of ideal one!

Click Here to buy





How We Measure

Pants and Shorts

Waist:

With the major buttoned up (i.e. the top button) open the jeans and lay them flat, like shown. Measure from the front where the major button closes to the back belt loop. Double this measurement to find the waist measurement.

The way we measure the waist is different from the 'Side to Side' technique. If you are used to the 'side to side' technique you can roughly roughly downsize by 1 inch.

For example, 'side to side' measurement for The Flat Head 3002 waist is 28inch and using our method measures at 29.25inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.

Thigh:

One inch down from the crotch, measure flat across to the other side.

Inseam:

Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.

 

 

Tops

Shoulder:

Lay flat then measure from the shoulder's edge to the other shoulder's edge.

Chest:

Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.