Samurai 15oz ‘Type 2’ Denim Jacket

February 06, 2018

Samurai 15oz ‘Type 2’ Denim Jacket

This is ‘Samurai-standard’ denim!

Made from the same high grade, 100% Texas cotton denim used for their iconic denims, this 15oz denim will age to a strong contrast, snow flake look! Woven using vintage machines, the grand indigo dyed denim has plenty of sharp, white dotted texture!

With various colours of yellow overdyed cotton thread stitching, each detail will age beautifully with time. Inspired by the legacy of Samurai, you can see the silver coated buttons and sterling selvage ID glimmer in the dark!

Complete with the iconic 'silver grade’ red tab, this is serious denim jacket you can enjoy for years!

Click here to buy

How We Measure

Pants and Shorts


With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.


One inch down from the crotch measure flat across to the other side.


Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.



Lay flat then measure from the shoulder's edge to the other shoulder's edge.


Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.