Full Count '1986’ Tailored Denim Pants (High Tapered fit)

December 06, 2017

Full Count '1986’ Tailored Denim Pants (High Tapered fit)

Here are some super comfy yet detailed pants for your daily semi casual fit! Made from soft, lightweight 10z indigo denim Full Count have shown us they are the serious denim tailors!

Created using vintage machines, the 10z denim fabric has been woven with vintage indigo dyed threads. Using 100% cotton, the fabric's texture is soft yet still has plenty of subtle neppy texture. With use you can expect this fabric to age to a soulful vintage appearance.

From the cuffed up leg opening, High tapered leg to the comfortable rise, the tailored construction is super detailed! The '90%' style inseam length works perfect with your favourite sneakers or even boots! This kind of construction is extremely difficult to execute and has been skilfully created using vintage machines.

If you are looking for some serious denim pants, these are the perfect choice for a classic, timeless style!

Click here to buy





How We Measure

Pants and Shorts

Waist:

With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.

Thigh:

One inch down from the crotch measure flat across to the other side.

Inseam:

Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.

Tops

Shoulder:

Lay flat then measure from the shoulder's edge to the other shoulder's edge.

Chest:

Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.