When it comes to vintage Type-1 denim jackets, the 'T-Back' style is one of the most valuable and rare items!
Made up of FC's classic 13.7oz denim, this one is slowly woven using vintage machines using long fibre Zimbabwe cotton for its soft characteristics. Thanks to the genuine indigo dying method, the tone of indigo are vibrant and will reveal many beautiful shades with use.
Staying true to the vintage collector's dream of the 'T-Back' type 1, this comes with all yellow cotton stitching and of course the backside seam. Originally this detail was only found on the big sizes of vintage jackets as manufacturers wanted to make better use of the limited width of vintage loomed denim.
You can always adjust thew fitting thanks to the adjustable cuffs and rear cinch back design.
For those who chase the beauty of obscure vintage denim details, this is for you!
Click here to purchase!
With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.
The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.
For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.
With the jeans lying flat measure from the crotch bar tack to the top of the waistband.
Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.
One inch down from the crotch measure flat across to the other side.
Flatten the leg and measure along the inseam from the crotch to the leg hem.
Measure straight across the hem from side to side.
Lay flat then measure from the shoulder's edge to the other shoulder's edge.
Lay shirt flat and measure from pit to pit.
With the sleeve flat measure from the shoulder to the cuff.
Measure from the shoulder down to the pitt.
With the shirt facing down, Measure from below the collar to the bottom hem.