FULL COUNT 12OZ DENIM ZIP JACKET

October 14, 2019

FULL COUNT 12OZ DENIM ZIP JACKET

Classic workwear never DIES!

Inspired by 1920s work denim jacket, this one comes with some functional waist pockets and a secured zip chest pocket! A classic vintage style that's still functional for modern day use!

This same style was worn by the bikers of 1950s-60s and evolved into now what we call the denim Rider’s jacket.

Made using vintage machines, this soft Zimbabwe cotton denim has almost no break in and is easy to wear through any season. With time, the soft denim will gain a subtle vertical texture and age to a vintage look.

With a vintage Waldes zip closure and adjustable cuffs, you can always adapt to your climate!

The triple needle construction will hold strong with daily use and of course keep you protected for years.

if you’re looking to grab a timeless denim jacket thats easy to match with other gears, this is one of the best choices!

Click here to purchase!





How We Measure

Pants and Shorts

Waist:

With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.

Thigh:

One inch down from the crotch measure flat across to the other side.

Inseam:

Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.

Tops

Shoulder:

Lay flat then measure from the shoulder's edge to the other shoulder's edge.

Chest:

Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.