Full Count 1110XX Denims(Slim Tapered fit)

October 24, 2016

Full Count 1110XX Denims(Slim Tapered fit)

We bring in this new model - 1110XX from Full Count company this time. This is quite an unusual pair from Full Count company. This pair goes with a new fabric that Full Count recently come up with - a 15.5oz salmon color selvage denim. For those who familiar FC, you might know that FC is known for their ultra soft pure Zimbabwe cotton twill. This 15.5oz denim is slightly tougher and goes with more texture compare with their 110X series fabric. The fabric has been more uneven weaved and goes with a mild slubby texture. You will see some nice uneven "dots" fade through time for the first time in Full Count denim.The denim is in a mid/high rise slim tapper fit with some extra room for the thigh and of course we bring in the classic red tab version for those who are into some vintage details. 

Click here to buy

How We Measure

Pants and Shorts


With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.


One inch down from the crotch measure flat across to the other side.


Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.



Lay flat then measure from the shoulder's edge to the other shoulder's edge.


Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.