Momotaro 12oz Wabash Jacketed Shirts are their new standard jacketed shirt that the heavy weight wabash fabrics are slowly woven from old machine should be used for some jackets! The black version have been black sulphur dyed and indigo version has been dyed in grand indigo then both of them will age to some soulful look with wears & washes! The white dots are also discharge printed that will fade along with fabrics as well to a vintage look!
The shirts also go with many details like chambray linings in the collar, flaps & cuffs & coated buttons etc, if you are looking for some good priced jacketed shirts from Momo' , these are some lovely choices!
Click here to buy
Click here to buy
With the major buttoned up (i.e. the top button) open the jeans and lay them flat, like shown. Measure from the front where the major button closes to the back belt loop. Double this measurement to find the waist measurement.
The way we measure the waist is different from the 'Side to Side' technique. If you are used to the 'side to side' technique you can roughly roughly downsize by 1 inch.
For example, 'side to side' measurement for The Flat Head 3002 waist is 28inch and using our method measures at 29.25inch.
With the jeans lying flat measure from the crotch bar tack to the top of the waistband.
Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.
One inch down from the crotch, measure flat across to the other side.
Flatten the leg and measure along the inseam from the crotch to the leg hem.
Measure straight across the hem from side to side.
Lay flat then measure from the shoulder's edge to the other shoulder's edge.
Lay shirt flat and measure from pit to pit.
With the sleeve flat measure from the shoulder to the cuff.
Measure from the shoulder down to the pitt.
With the shirt facing down, Measure from below the collar to the bottom hem.