Iron Heart 777-XHS 25oz Denims (Super Slim Tapered fit)

November 22, 2016

Iron Heart 777-XHS 25oz Denims (Super Slim Tapered fit)

We always try to extend our denim collection and here we are with the heaviest denim that we have ever brought in - Iron Heart 777-XHS. Using a 25oz extra heavy Japanese selvedge denim custom made by Iron Heart, this is also the heaviest that Iron Heart has ever produced. For this kind of heaviness, denim artisans have to wear protective glasses when they sew them in case the needles explode. Not just a thick on fabric, the colour is deeper as well, 777XHS goes with a ultra deep indigo dye that you will experience more layer of indigo colour through wearing. The denim is in a classic 777 slim tapper fit to give you a modern look. For those denim-heads who haven't experienced the toughness of 25oz, we will highly recommend!

Click here to buy





How We Measure

Pants and Shorts

Waist:

With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.

Thigh:

One inch down from the crotch measure flat across to the other side.

Inseam:

Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.

Tops

Shoulder:

Lay flat then measure from the shoulder's edge to the other shoulder's edge.

Chest:

Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.