Fresh outta production, we have some amazing black denims for ya’ll!
With that classic slim tapered fit from Iron Heart, these are perfect for those who enjoy strong ageing with use.
Thanks to the black sulphur dying processes applied to the warp and weft, these will age to a black and white, high contrast look. Much more contrast compared to typical black warp dyed denims!
Using IH’s classic red selvage ID these have a familiar feel and will only get better with use!
For those who would like to try Iron heart’s black denims, we guarantee you will be impressed with the amazing contrast of ageing!
Click here to buy!
With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.
The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.
For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.
With the jeans lying flat measure from the crotch bar tack to the top of the waistband.
Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.
One inch down from the crotch measure flat across to the other side.
Flatten the leg and measure along the inseam from the crotch to the leg hem.
Measure straight across the hem from side to side.
Lay flat then measure from the shoulder's edge to the other shoulder's edge.
Lay shirt flat and measure from pit to pit.
With the sleeve flat measure from the shoulder to the cuff.
Measure from the shoulder down to the pitt.
With the shirt facing down, Measure from below the collar to the bottom hem.