FW 'worker' pants ain't like any other!
In the 1900s~ workers of the USA looked for quality workwear made of the 'STIFEL' fabric! This design with an alternating back pocket design, a re-inforced tool pocket and rectangular front pockets was worn by the dockworkers.
For added comfort, you can adjust the rear cinch back for the perfect fit. The waistband is also lined with an indigo hickory fabric for durability.
FW has taken this famous Wabash fabrication recipe to another level with denim weaving techniques.
This is a selvage fabric made from indigo-dyed threads, meaning that with time, you’ll see many shades of indigo fading up, unlike typical over-dying techniques. Check the pockets and waist
As for the Wabash pattern itself, they’ve applied two layers, an irregular beige dot with light burgundy speckles on top. This gives the overall pattern so much depth and looks nothing like any other Wabash. For added character, the backside of the fabric features a skilfully printed ‘STIFUL’ logo mark inspired by the legendary US fabric company.
Click here to buy!
With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.
The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.
For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.
With the jeans lying flat measure from the crotch bar tack to the top of the waistband.
Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.
One inch down from the crotch measure flat across to the other side.
Flatten the leg and measure along the inseam from the crotch to the leg hem.
Measure straight across the hem from side to side.
Lay flat then measure from the shoulder's edge to the other shoulder's edge.
Lay shirt flat and measure from pit to pit.
With the sleeve flat measure from the shoulder to the cuff.
Measure from the shoulder down to the pitt.
With the shirt facing down, Measure from below the collar to the bottom hem.