Inspired from vintage engineer workwear, this is your all seasons overcoat!
Using their specialty, thread dyed moleskin, the outer shell has plenty of vintage character and will age to a vintage, high contrast look. With wear, the fluffly texture will become stronger and show off it’s true beauty.
If you look closely, you can see the insane level of detail the FW's put their efforts towards. From the A-1 curved style pocket flaps to the diamond elbow panels, this is tailoring standard construction.
The functional design features an internal waist size adjuster, wind-flap with zip and twin internal loops for hanging your keys or wallets! Use the collar strap for added weather protection and stay breathable with the under-arm air holes!
If you’re after a serious cold season item, this moleskin coat is a next level choice.
Click here to buy
With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.
The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.
For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.
With the jeans lying flat measure from the crotch bar tack to the top of the waistband.
Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.
One inch down from the crotch measure flat across to the other side.
Flatten the leg and measure along the inseam from the crotch to the leg hem.
Measure straight across the hem from side to side.
Lay flat then measure from the shoulder's edge to the other shoulder's edge.
Lay shirt flat and measure from pit to pit.
With the sleeve flat measure from the shoulder to the cuff.
Measure from the shoulder down to the pitt.
With the shirt facing down, Measure from below the collar to the bottom hem.