Freewheelers “Burnham” 13oz Duck Engineer Coat (Brown)

August 05, 2018

Freewheelers “Burnham” 13oz Duck Engineer Coat (Brown)

Inspired from vintage engineer workwear, this is your all seasons overcoat!

Using their specialty, thread dyed duck fabric, the outer shell has plenty of vintage character and will age to a vintage, high contrast look. The 13oz weight is comfy enough to wear by itself or even with a sweater and shirt.

If you look closely, you can see the insane level of detail the FW's put their efforts towards. From the A-1 curved style pocket flaps to the diamond elbow panels, this is tailoring standard construction.

The functional design features an internal waist size adjuster, wind-flap with zip and twin internal loops for hanging your keys or wallets! Use the collar strap for added weather protection and stay breathable with the under-arm air holes!

If you’re after a serious cold season coat, this is a durable and functional choice!

Click here to buy

How We Measure

Pants and Shorts


With the major buttoned up open the jeans and lay them flat like shown. Measure from the front where the major button closes to the back belt loop. Then double this measurement to achieve the waist measurement.

The way we measure is different from 'Side to Side', If you are not used to our method you should downsize by 1 inch.

For example, side to side measurement for The Flat Head 3002 waist is 28inch and using our method 29.25 inch.

Front Rise:

With the jeans lying flat measure from the crotch bar tack to the top of the waistband. 

Back Rise:

Spread out the crotch so the bar tack is visible, then measure from the crotch to the top of the waistband.


One inch down from the crotch measure flat across to the other side.


Flatten the leg and measure along the inseam from the crotch to the leg hem. 

Leg Openning:

Measure straight across the hem from side to side.



Lay flat then measure from the shoulder's edge to the other shoulder's edge.


Lay shirt flat and measure from pit to pit.

Sleeve length:

With the sleeve flat measure from the shoulder to the cuff.

Arm hole openning:

Measure from the shoulder down to the pitt.

Vertical length:

With the shirt facing down, Measure from below the collar to the bottom hem.